You are a Guest, please Join now to allow full access to the website and be part of our community. You can register by clicking the "Click Here to create an account" link at the top left of the page under our Logo
Hi all
Just finished fitting a reversing camera to our RV.... I bought it off a fellow MHFer earlier in the year )thanks, you know who you are....) and have only just found the time to fit it.
The drilling through the rear cap was interesting because I had to drill through the fibreglass into the void, I did try to send the cable along the void and then down the side but it wasn't having any of it.....
I decided that the only way to route the cable was to bring it into a rear cupboard and then across the rear wall, through the wardrobe and back out into the bottom void in the rear cap and down towards the bottom of the floor. Well the rear wall is mounted upon about a 2" thick piece of timber and this had to be drilled through to get into the cupboard, I must say that this was the most difficult part of the installation, and after several minutes of drilling one begins to wonder why one had not got a professional installer to do the job.... All sorts of awful thoughts run through your mind .
Anyway the cable finally fell out the bottom of the cap and I could wander around under the RV attaching the cable to the chassis all the way to the front end. I drilled through the front bulkhead, it was a mixture of steel and wood... and passed the cable through into the cab area. The cable was then run across to where I wanted the monitor and the power cables hooked up and it was all tested... Great stuff it works a treat. Tidied up all the cabling and secured it out of the way and then filled the holes I had drilled to stop water and wind getting in
I am really pleased with the outcome and I feel that the camera really adds a significant level of additional safety to the vehicle when it is being reversed.
I hope this gives encouragement to anyone else considering buying and fitting a back up camera....
Keith
The following members of MHF thanked kands for this posting
Nice one Keith, be interested in seeing your install... My new one has a reversing cam, but no screen! Another thing to find out where the wires are and see if I can reconnect it to another screen.
The following members of MHF thanked Snelly for this posting
I love our "aid to reversing camera". A few weeks back a lead popped out and we lost signal, wow suddenly I could not park.
The chap who runs the MOT station I use however showed me official documentation to show that as far insurance companies are concerned they are not to be relied on for reversing.
The MOT station manages all the Dustcart lorries and they have them not to reverse with but to watch out for people jumping in the back. Officially that is!
Hi Linda,
Nice to meet you,
I am sure Keith already has a DVD player
No not too muddy Thanks for the use of the chair for Jan, she managed to survive the whole day again.
Steve
The following members of MHF thanked SandJ for this posting