Mechanical & Technical >> Ford Chassis
Author:
kontikiJo
Date:
24-04-2012
Subject:
Battery
Message:
I have a Burstner ford nexxo and my engine battery has gone flat and is situated under the driver's seat. Has anyone had a similar problem that can advice me how to remove the seat. Pompt reply would be appreciaterd.
Thanks Joe
Author:
ched999uk
Date:
24-04-2012
Message:
Sorry can't help with your mh but as you wanted a swift reply I thought I might be able to help.
On our Fiat you have 4 torq bolts that hold the seats onto the seat base. 2 are horizontal at the front of the seat, then you slide the seat forward then you can access the rear 2.
Yours might be similar in that you have to slide the seat forward and back to see the bolts in the runners.
Hope that helps, if not my reply did cause a bump.
Good luck and please post back when you find the solution as I am sure others will need the answer in the future.
Author:
Davethepenguin
Date:
25-04-2012
Subject:
Battery
Message:
Morning - Ched is correct, They are held on with torque bolts but on my 2010 transit there are 5 bolts per swivel seat.