[Paulway]

Thanks for everyones help setting this up, never done one before, I have only just got round to trying it would have given up without the posts.
Just a question I hope it is not to stupid, do you have to go through this procedure every time you set up i.e. do the settings you have made:- sattelite and channels, have to be re-found or do they retain for the next time you connect up to the power supply?
I just can't imagine going through this process every time I set it up on site, I would be spending all my holiday trying to sort it out.

 

[Paulway]

Thanks for that John Sandy, I think I can cope with that then!!
Must say I have not bothered with TV in the past with the mediocre picture quality and always thought of Sat being overly costly, but this little setup is really quite impresive and if i've only got to align the dish then that is no worse than fidling with the rotten aerials that don't work to well.

 

[Paulway]

Hi Carolgavin,
I too had a lot of problem getting a signal. After following the infomation on here I managed to get it to work. I believe that in my case I had to much inclination on the dish, after I got the stations I experimented to try to improve on the 72% Quality and realised how easy it was to lose the signal and that the dish (in my case) had to be completely vertical if not looking down a little from the vertical. When I origionally tried it I had put a bit of incline on the dish which I realised from my experimentation after getting the signal was enough to lose it again. I still was not able to better 72% but the pictures were superb.