Motorhome Facts Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
13 Posts
mobilvetta euroyatch pas mirror

Hi Jimplim here, I had the same [problem].I ended up measuring the distance between the studs and drill a hole inside the cab. Only to find that you can with the greatest difficulty get to the studs from underneath,up under the wheel arch.I used a long reach socket in the end thro the hole i had drilled.Cant remember the size off hand.Check the studs on your new mirror.I did try and gain access thro the side panel by the electric window motor but it is a bit of a clat.!I put rubber bung in the new hole to tidy it up.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top