Motorhome Facts Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
39 Posts
Hello,

I know this post is an old one and you might not even have the EuroYacht motor home anymore, however I do and the correct way to get the bottom two stud out of the mirrors is from the out side under the wheel arch. Socket size is 10mm. no need to drill additional holes inside the cab area. It is possible to get your arm under and use a spanner if need be.

Another think I found when unde the arch was that as well as the wiring for the electrically operated mirrors was the wiring for heated mirrors.

Behind the dash board the wiring plus plug is available for the switch too. New switch from Iveco £27.00

So it is all just Just plug and play so to speak.

Anyway this is for anyone else out there who may come across the same problem good luck and happy travelling

HMFIC
 

·
Registered
Joined
·
39 Posts
Hello Simon

I guess your Mobilvetta has white mirrors as mine did

I replaced both of mine but did not get them repainted I just them both in the black.

I got mine from ebay, just search "Iveco Daily mirror" and see if your match what is on line.

As I said in my post above there are three bolts on each mirror one should be accessed from inside the cab and the other two are accessed from under the whell arch. You may need to removed the inner arch which should only be rovvited in place.

Good luck

The battached was what I have just found on ebay hopefulyy the same type as yours, mine is a 1996 model

http://www.ebay.co.uk/itm/Iveco-Tur...CommercialVehicleParts_SM&hash=item33535e6f2a

http://www.ebay.co.uk/sch/i.html?_t...CarParts_SM&_trksid=p3286.c0.m14.l1513&_pgn=1

Paul
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top