Motorhome Facts Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
154 Posts
Discussion Starter · #1 ·
Hi,

My colour reversing camera has now decided to go black and white only. It was okay on colour until about a month ago. Any advice on what to check or adjust would be welcome.

Ken
 

·
Registered
Joined
·
565 Posts
ken said:
Hi,

My colour reversing camera has now decided to go black and white only. It was okay on colour until about a month ago. Any advice on what to check or adjust would be welcome.

Ken
You need to check the settings, as changing NTSC to PAL or vice versa will
change from colour to B&W

Where you testing the DVD in the same input port, as used by the camera, as
on mine with two inputs its possible to change individual input port
settings.

You can also try the camera in another monitor.

If you have any marshalling (connection boxes with sockets etc) between the monitor and the camera, try your system without it.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top