Motorhome Facts Forum banner
1 - 5 of 5 Posts

·
Premium Member
Joined
·
90 Posts
Discussion Starter · #1 ·
Hi all

The nozzle supplying the flush water to the toilet has fallen through its existing hole whilst being cleaned...any bright ( and clean :laugh: ) ideas as to how to the little bu..er out?

Thanks in advance
 

·
Premium Member
Joined
·
2,106 Posts
I presume you mean that's it's fallen back into the flush tank? If so it should be relatively easy to retrieve. You gain access to the flush tank by gently prizing off the handle with your fingers and then lifting out the housing which contains the 12v switch etc. You can then pull out the pump if required by gently pulling on the flex which connects the pump to the switch. Once everything is clear of the flush tank you should be able to spot the nozzle. This will all be a great deal easier of course if the flush tank is empty.

There are videos on YouTube which show how to gain access to the flush tank. In fact there are videos on YouTube which show most things related to motorhomes. Some are really useful while others will leave you reflecting on the sheer stupidity of some m\h owners .....
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top