Motorhome Facts Forum banner
1 - 10 of 10 Posts

·
Registered
Joined
·
4,908 Posts
Discussion Starter · #1 ·
Hi everyone,

Saw an advert in MMM for a water coupler, fits over existing fresh water filler opening and enables hose to be fitted. Saves holding the hose in the opening. Well my flat hose often falls out...............so I thought it would be a good idea.
Anyway the web site/phone number is: 01738 730341

www.gillonsgadgets.co.uk
 

·
Registered
Joined
·
2,701 Posts
Hi Rita

I've also seen one of these advertised, but mine is a simple solution.

I also have a flat hose, but have fitted a "hozelock" (or any other brand) connector that allows me to "plug in" a short length of round hose that has a similar connector with a joining coupler on one end and nothing on the other end. This is then pushed into the filler hole as far as it will go and it stays put for the duration of the filling.
Simple eh!
 

·
Registered
Joined
·
565 Posts
There are several versions on the market, here is another type @£14.75



but why not make your own simple solution like this with a bit of copper tube



There's more pictures and full explanation here
 

·
Registered
Joined
·
1,007 Posts
Hi Zulurita,

We have the Wassa one it is very good,used to use a similar idea to Marcle above but used the u shape rubber hose that goes into washing machine outlet.
 

·
Registered
Joined
·
4,908 Posts
Discussion Starter · #7 ·
Thanks everyone for your tips/info. I did see the other water coupler version in the motorhome monthly mag which I picked up from Martins in Exeter yesterday. Marcle your info is very good thanks.
 

·
Registered
Joined
·
2,206 Posts
Malc said:
Hi Steve,
Nice to see you back!
Malc
My thoughts too, hope you stay this time we need people like you around and from a personal point of view you were very helpful when I joined back in the dark ages :D
 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top